- Custom Drill Bit
- Cylindrical Locks ( Electric )
- Door Monitoring
- Electric Swing Clear Hinge
- Electric Trim
- Electrification Kits
- Electrified Hinges
- Electrified Rim Exit Device
- Mortise Locks ( Electric )
- Old Style Marray Hinges
- Parts Catalog
- Perfect Raceway Tool
- Pivots
- Power Door Loops
- Request to Exit Switches
Products > Electric Swing Clear Hinge > TEF2+4C Swing Clear
You have already read about how these hinges are the best engineered, most code compliant and nicest looking hinges.
Here's what you need to know about hospital/swing clear electrified hinges when you place your order.
They only come in 4.5 inches and 5.0 inches high. We can special order a different size if you need it. In fact, we can pretty much make any type of hinge you need. Choose the base material (remember, stainless steel is for hospitals and bio lab applications) and the height you need.
Hinges are called out by the height size first (measure from the top of the leaf and ignore the pin head), then, they are called out for the width. These electric hinges only come in 4.5 inch and 5.0 inch widths too. The measurement of the width can be a little tricky, so if you have questions, don't hesitate to ask Marray
So, a typical hinge might be a 4.5 x 4.5 SC (for swing clear) and the amount of wires you need.
Ratings on our wires are some of the best in the industry
TEF2+4 means that two wires are heavy 20 gauge wires that are tested and listed for 16 amps at 5 seconds @24 Volts AC or DC
The smaller two pair are rated at .10 amp for switching and signaling needs.

